The chin guard has two individually adjustable air vents to drive air directly to the inner surface of the visor avoiding misting even during extreme weather conditions. Moreover, helmet ventilation is guaranteed by a wide adjustable frontal vent and inner air grooves. DROID is the result of the gained experience by the first Italian company to produce flip up helmets; It comes with the dual homologation P/J which allows to ride also with the chin guard open thanks to the lever on the left side of the helmet; This lever when in the “J” position, blocks the chin guard in the fully open position avoiding accidental closing. Thanks to the reduced dimensions of the helmet, the weight of the DROID is only 1550 gr +/- 50gr. DROID is equipped with the exclusive Double Visor Tech system that, thanks to the easy to use inner sun-visor, allows to ride always with the right light and in safety. The inner sun-visor is treated anti-scratch, while the outer clear visor is not only anti-scratch but also anti-fog thanks to the Max Vision Pinlock lens. The lining, made with the best hypoallergenic and transpiring fabrics to grant maximum freshness, is entirely removable and washable. Moreover the cheek pads have been conceived to permit the accommodation of glasses.

XTRACE can be used either in its full configuration with peak and visor or without the peak or also without the visor. All different configurations can be done without the use of tools. 

XTRACE is offered in two outer shell sizes to offer the best fitting proportion between the shell volume and the motorcyclist’s head size. 

XTRACE is equipped with the DVT system (Double Visor Tech) that thanks to the integrated sunshade visor, easy to use, allows always to ride with the perfect light and maximum safety. The sunshade visor is anti-scratch treated, while the outer clear one is treated anti-scratch and prepared to fit the Pinlock lens. 

Ventilation is guaranteed by 3 wide air vents easy to regulate also with gloves; the lower vent on the chin guard drives air directly to the inner side of the visor to avoid misting; the two vents on top channel fresh air inside the helmet through numerous air grooves, while the rear vent favors the discharge of hot and stale air. 

The lining is completely removable and washable made with transpiring fabrics. The wind stop device under the chin guard of the helmet is removable as well as the breath guard. 

*Kindly note no exchange, no refund and no warranty*

Thanks to a spring tilting system, it is very simple and intuitive to open and close the visor with only one hand. This characteristic differs the Ghost from the other open face helmets on the market equipped with simple goggle, mask, and standard elastic strap bands.

Ghost can be used in 4 different configurations: 1) equipped with the visor, the foam profile along the inner lower side of the visor, and the mask; 2) equipped with the visor and the mask, but without the foam profile of the visor; 3) equipped with the visor and the foam profile but without the mask; 4) equipped only with the visor, without the foam profile and the mask.

The shell is made of tri-composite material (fiber, carbon and kevlar) and is offered in two shell sizes, it is also available the full carbon version with the shell entirely made of carbon fiber.

An easy to mount and remove double Pinlock lens is included to prevent the visor from fogging up.

The chin guard has two individually adjustable air vents to drive air directly to the inner surface of the visor avoiding misting even during extreme weather conditions. Moreover, helmet ventilation is guaranteed by a wide adjustable frontal vent and inner air grooves. DROID is the result of the gained experience by the first Italian company to produce flip up helmets; It comes with the dual homologation P/J which allows to ride also with the chin guard open thanks to the lever on the left side of the helmet; This lever when in the “J” position, blocks the chin guard in the fully open position avoiding accidental closing. Thanks to the reduced dimensions of the helmet, the weight of the DROID is only 1550 gr +/- 50gr. DROID is equipped with the exclusive Double Visor Tech system that, thanks to the easy to use inner sun-visor, allows to ride always with the right light and in safety. The inner sun-visor is treated anti-scratch, while the outer clear visor is not only anti-scratch but also anti-fog thanks to the Max Vision Pinlock lens. The lining, made with the best hypoallergenic and transpiring fabrics to grant maximum freshness, is entirely removable and washable. Moreover the cheek pads have been conceived to permit the accommodation of glasses.

It is equipped with an integrated sunshade visor DVT (Double Visor Tech) that permits to ride always with the best light conditions and maximum safety. Drift is also available in version full CARBON with a weight reduction, compared to the tricomposite version, of around 100gr.

DRIFT quick release visor mechanism allows visor self-adjustment to guarantee a close contact of visor and window beading. Thanks to the visor mechanism with a spring double movement, it will not be necessary to manually regulate it in order to avoid incoming of water or air. Moreover, the lever on the left side of the visor mechanism consents to stop the position of the visor at 0,5cm from the window beading to avoid or eliminate fogging, which is absorbed by the wind while riding. When the lever is lifted, the visor is locked to avoid sudden opening during a ride or fall.

DRIFT is equipped with a transparent anti-scratch visor, an adjustable Pinlock lens Max Vision to avoid fogging, and an integrated anti-scratch sunshade visor easily maneuverable with a lateral lever.

Ventilation is guaranteed by 3 wide air vents easy to regulate also with gloves. The lower vent on the chin guard drives air directly to the inner side of the visor to avoid misting; the vent on top channels fresh air inside the helmet through numerous air grooves, while the rear vent favors the discharge of hot and stale air.

The lining, made with rear reflective inserts, is entirely removable and washable including the padding on the chinstrap; made with hypoallergenic and transpiring fabrics to grant maximum freshness.

The retention system is equipped with a double D ring.

*Kindly note no exchange, no refund and no warranty*

• Pista GP-R / Corsa-R
• Scratch resistant visor

XTRACE can be used either in its full configuration with peak and visor or without the peak or also without the visor. All different configurations can be done without the use of tools. 

XTRACE is offered in two outer shell sizes to offer the best fitting proportion between the shell volume and the motorcyclist’s head size. 

XTRACE is equipped with the DVT system (Double Visor Tech) that thanks to the integrated sunshade visor, easy to use, allows always to ride with the perfect light and maximum safety. The sunshade visor is anti-scratch treated, while the outer clear one is treated anti-scratch and prepared to fit the Pinlock lens. 

Ventilation is guaranteed by 3 wide air vents easy to regulate also with gloves; the lower vent on the chin guard drives air directly to the inner side of the visor to avoid misting; the two vents on top channel fresh air inside the helmet through numerous air grooves, while the rear vent favors the discharge of hot and stale air. 

The lining is completely removable and washable made with transpiring fabrics. The wind stop device under the chin guard of the helmet is removable as well as the breath guard. 

*Kindly note no exchange, no refund and no warranty*

• Pista GP-R / Corsa-R
• Scratch resistant visor